BMS-RF-DB

Flat Roof

series

Flat Roof & Ground-Mounted Applications

BMS-RF-DB

Flat Roof

series

Flat Roof & Ground-Mounted Applications

Key product features

Designed for installations on roofs that do not face the sun, where panels are mounted with an east–west orientation and tilt.

The ballast profile, which connects the rear and front mounting components, ensures a clean
installation appearance on sloped or uneven surfaces and also prevents panel damage under windy conditions.

The system can be fixed to the surface using screws, anchors, or other fastening elements,
or alternatively secured with ballast weights in cases where roof penetration is not desired, such as insulated surfaces.

Tilted for
Maximum Efficiency

Suitable for all panel sizes.

Panels must be installed horizontally on the surface.

Since the rear edges of the panels are positioned adjacent to each
other in this type of system, no wind deflector is required.

All mounting components, panel clamps, and ballast profiles are made of aluminum.

Bolts and nuts are stainless steel, quality A2–304.

Key product features

Designed for installations on roofs that do not face the sun, where panels are mounted with an east–west orientation and tilt.

The ballast profile, which connects the rear and front mounting components, ensures a clean
installation appearance on sloped or uneven surfaces and also prevents panel damage under windy conditions.

The system can be fixed to the surface using screws, anchors, or other fastening elements,
or alternatively secured with ballast weights in cases where roof penetration is not desired, such as insulated surfaces.

Tilted for
Maximum Efficiency

Suitable for all panel sizes.

Panels must be installed horizontally on the surface.

Since the rear edges of the panels are positioned adjacent to each
other in this type of system, no wind deflector is required.

All mounting components, panel clamps, and ballast profiles are made of aluminum.

Bolts and nuts are stainless steel, quality A2–304.